2014 / Journal of Dentistry
Design of restorative materials should be focused on promoting not only adhesion but also dentine self-repair processes
2013 / Fluid Phase Equilibria
In this work, gas adsorption equilibria for H2 and for CO2 with THF clathrate hydrate particles and with tetra-n-butyl ammonium bromide (TBAB)… Continue reading Measurement of pure hydrogen and pure carbon dioxide adsorption equilibria for THF clathrate hydrate and tetra-n-butyl ammonium bromide semi-clathrate hydrate
2014 / Caries Research
The aim of this study was to ascertain whether zinc may improve the repair ability of demineralized dentin. Dentin disks… Continue reading Zinc Induces Apatite and Scholzite Formation during Dentin Remineralization
2009 / Journal of Physics: Conference Series
Carbon nanotubes (CNT) are novel materials with unique electrical, thermal, and structural proprieties, which make them attractive for applications in… Continue reading Dispersion of carbon nanotubes by single-stranded DNA wrapping for advanced biomedical applications
2010 / Applied Physics Express 3
Nanocarbon materials have been synthesized by pulsed laser ablation (532 nm; 52 J/cm2; 7 ns; 10Hz) of highly oriented pyrolytic… Continue reading Pulsed Laser Ablation Synthesis of Diamond Molecules in Supercritical Fluids
2010 / Island Arc
We propose that competent layers composed of silicified rocks in the Cretaceous Ryoke low-pressure/temperature (low-P/T) metamorphic belt in the Iwakuni–Yanai… Continue reading Silicification of pelitic schist in the Ryoke low-pressure/temperature metamorphic belt, Southwest Japan: Origin of competent layers in the middle crust
2016 / Nanoscale Research Letters
In this study, an oxygen–acetylene flame synthesis system was developed to fabricate nanocarbon-based nanofluids (NCBNFs) through a one-step synthesis method.… Continue reading Fabrication and Characterization of Nanocarbon-Based Nanofluids by Using an Oxygen–Acetylene Flame Synthesis System
2015 / Physical Chemistry Chemical Physics
Certain molten complexes of Li salts and solvents can be regarded as ionic liquids. In this study, the local structure… Continue reading Li+ solvation in glyme?Li salt solvate ionic liquids
2015 / Carbon
Carbonaceous nanostructures such as carbon nanotubes, graphene and transparent carbon-based thin films are envisioned to be part of the next… Continue reading Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel
2013 / Japanese Journal of Applied Physics
Polysilane-based organic solar cells with bulk heterojunction and heterojunction structures were fabricated by spin-coating using a mixture solution. Microstructures of… Continue reading Microstructures and Photovoltaic Properties of Polysilane-Based Solar Cells
2014 / Journal of Materials Chemistry A
We report the in situ synthesis of nitrogen-doped carbon nanoparticles (NCNPs) by a solution plasma process without the addition of… Continue reading In situ solution plasma synthesis of nitrogen-doped carbon nanoparticles as metal-free electrocatalysts for the oxygen reduction reaction
2016 / Bulletin of the Chemical Society of Japan
Insoluble hierarchical polybithiophene/poly(ethylenedioxythiophene) thin films with a double-layered structure were prepared on an indium tin oxide transparent electrode by sequential… Continue reading Fabrication and Photocurrent Generation Properties of Insoluble Hierarchical Polythiophene Thin Films Prepared by Sequential Electrochemical Polymerization
2014 / Advanced Materials Research
One of the promising material for proton-conducting solid electrolyte operating at intermediate temperature range (400-600 °C) is the Yttrium-doped BaZrO3… Continue reading Preparation of Y-doped BaZrO3 Proton Conducting Solid Electrolyte via Modified Low Temperature Pechini Method.
2015 / Journal of Materials Chemistry C
Using direct sulfation of cellulose, we prepared sulfated cellulose (CS) with various degrees of substitution of sulfate groups (DS), which… Continue reading The development of a highly conductive PEDOT system by doping with partially crystalline sulfated cellulose and its electric conductivity
2016 / Carbon
We present the use of Selenium (Se) and Tellurium (Te) as promoters in the growth of carbon nanotubes (CNTs) by… Continue reading Group 16 elements control the synthesis of continuous fibers of carbon nanotubes
2015 / Nanotechnology (IEEE-NANO)
Nitrogen-doped graphene potentially could be used in electronic devices, sensors, and energy-based devices. The bonding state between the carbon and… Continue reading Selective nitrogen doping of graphene by energy-controlled neutral beam
2016 / Inorganic Chemistry Frontiers
[5,15-Di(4-aminophenyl)-10,20-diphenylporphyrinato]zinc(II) was found to electropolymerize on electrodes such as glassy carbon (GC), indium tin oxide (ITO), and tin oxide, to… Continue reading Electrochemical fabrication of one-dimensional porphyrinic wires on electrodes
2013 / Japanese Journal of Applied Physics
A series of bulk-heterojunction organic solar cells incorporating silver nanoparticles was fabricated and evaluated. Silver nanoparticles were incorporated in the… Continue reading Incorporation Effect of Silver Nanoparticles on Inverted Type Bulk-Heterojunction Organic Solar Cells
2016 / Journal of electrochemical society
To study the Li storage mechanism in multiwalled carbon nanotubes (MWCNTs), MWCNTs were coated with pyrolytic carbon, prepared by dipping… Continue reading Understanding the Li Storage Sites in MWCNTs: SEI, the Key for Delithiation at High Potential
2016 / Sensors and Actuators B: Chemical
V2O5 thin films were deposited onto fused silica, alumina and conductometric sensor supports by means of rf reactive sputtering from a… Continue reading V2O5 thin films for gas sensor applications
