Determination of Olefin Content of Gasoline by Supercritical Fluid Chromatography
January 5, 2024
Download This ApplicationIntroduction
Gasoline is produced by fractional distillation of petroleum at a boiling point between 30°C and 200°C. It contains hydrocarbons such as paraffin, olefin, and aromatics, carbon numbers of which are between 4 and 10. Characterization of gasoline requires the determination of the contents of those hydrocarbons.
American Society for Testing and Materials (ASTM) announced a method, D6550-00: Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography. We have established an analysis system in accordance with this method.
A JASCO SF- 2000 series analytical SFC was used for the measurement. The system consisted of a PU-2080-CO2 liquefied carbon dioxide delivery pump, AS-2059-SF autosampler, HV-2080-01 column switching valve (2 sets), CO-2060 column oven, flame ionization detector (FID), BP-2080 back-pressure regulator, and ChromNAV data system.
Separation columns: SFCpak SIL PA silica gel column (4.6 mm ID x 250 mmL, 5 µm) and a SFCpak SIL AGS silver-coated silica gel column (4.6 mm ID x 50 mmL, 5 µm).
The operation for the measurement was carried out as follows:
- Connect the silica gel and silver-coated silica gel columns, and deliver liquefied carbon dioxide.
- Inject sample to elute paraffin first.
- Disconnect the silver-coated silica gel column from the flow path using the column switching valves and elute aromatics adsorbed on the silica gel column. Using the column switching valves, disconnect the silica gel column and reconnect the silver-coated silica gel column and elute the olefins adsorbed on the silver-coated silica gel column.
Keywords
220054SRE
Results
Figure 1. Illustrates a schematic of the system. Switching the two columns allowed separation of paraffin, aromatics and olefin. Eluent from the columns was divided using a splitter and a portion of the eluent was introduced into the FID detector.
4=autosampler, 5=silica gel column, 6=silver-coated silica gel column, 7=column oven, 8=splitter,
9=oven for FID, 10=FID, V1 and V2=column switching valve.
Figure 2 shows a SFC chromatogram of a standard mixture of hexadecane, toluene, and octadecene. Hexadecane was selected as the paraffin, toluene as the aromatic and octadecene as the olefin.
Conditions: separation column=SFCpak SIL-PA (4.6 mmID x 250 mmL, 5 µm) and SFCpak SIL PA-AGS (4.6 mmID x 50 mmL, 5 µm),
flow rate of liquid CO2=2 mL/min, injection volume=1 µL.
Figure 3 shows a SFC chromatogram obtained by direct injection of commercially available gasoline. The olefin content of the gasoline was quantified at 21.1% by comparing peak areas.
Featured Products:
-
SFC-4000 Hybrid SFC for analytical and semi-preparative SFC.
Hybrid SFC System
-
SFC-4000 Preparative SFC system for preparative scale purifications.
Preparative SFC System
-
SFC-4000 Semi-Preparative SFC for semi-preparative scale purifications.
Semi-Preparative SFC System
Determination of Olefin Content of Gasoline by Supercritical Fluid Chromatography
Introduction
Gasoline is produced by fractional distillation of petroleum at a boiling point between 30°C and 200°C. It contains hydrocarbons such as paraffin, olefin, and aromatics, carbon numbers of which are between 4 and 10. Characterization of gasoline requires the determination of the contents of those hydrocarbons.
American Society for Testing and Materials (ASTM) announced a method, D6550-00: Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography. We have established an analysis system in accordance with this method.
A JASCO SF- 2000 series analytical SFC was used for the measurement. The system consisted of a PU-2080-CO2 liquefied carbon dioxide delivery pump, AS-2059-SF autosampler, HV-2080-01 column switching valve (2 sets), CO-2060 column oven, flame ionization detector (FID), BP-2080 back-pressure regulator, and ChromNAV data system.
Separation columns: SFCpak SIL PA silica gel column (4.6 mm ID x 250 mmL, 5 µm) and a SFCpak SIL AGS silver-coated silica gel column (4.6 mm ID x 50 mmL, 5 µm).
The operation for the measurement was carried out as follows:
- Connect the silica gel and silver-coated silica gel columns, and deliver liquefied carbon dioxide.
- Inject sample to elute paraffin first.
- Disconnect the silver-coated silica gel column from the flow path using the column switching valves and elute aromatics adsorbed on the silica gel column. Using the column switching valves, disconnect the silica gel column and reconnect the silver-coated silica gel column and elute the olefins adsorbed on the silver-coated silica gel column.
Results
Figure 1. Illustrates a schematic of the system. Switching the two columns allowed separation of paraffin, aromatics and olefin. Eluent from the columns was divided using a splitter and a portion of the eluent was introduced into the FID detector.
4=autosampler, 5=silica gel column, 6=silver-coated silica gel column, 7=column oven, 8=splitter,
9=oven for FID, 10=FID, V1 and V2=column switching valve.
Figure 2 shows a SFC chromatogram of a standard mixture of hexadecane, toluene, and octadecene. Hexadecane was selected as the paraffin, toluene as the aromatic and octadecene as the olefin.
Conditions: separation column=SFCpak SIL-PA (4.6 mmID x 250 mmL, 5 µm) and SFCpak SIL PA-AGS (4.6 mmID x 50 mmL, 5 µm),
flow rate of liquid CO2=2 mL/min, injection volume=1 µL.
Figure 3 shows a SFC chromatogram obtained by direct injection of commercially available gasoline. The olefin content of the gasoline was quantified at 21.1% by comparing peak areas.
Keywords
220054SRE