A series of activated carbons (ACs) derived from spent disposable wooden chopsticks was prepared via steam activation and used to… Continue reading Valorization of spent disposable wooden chopstick as the CO2 adsorbent for a CO2/H2 mixed gas purification
Carlos Morillo
April 18, 2022
In the long history of traditional Chinese medicine, single herbs and complex formulas have been suggested to increase lifespan. However,… Continue reading The flavonoid corylin exhibits lifespan extension properties in mouse
Carlos Morillo
March 14, 2022
Borophene has been recently proposed as a next-generation two-dimensional material with promising electronic and optical properties. However, its instability has… Continue reading Liquid crystalline 2D borophene oxide for inorganic optical devices
Carlos Morillo
March 14, 2022
Carlos Morillo
March 14, 2022
Reverse electrodialysis (RED) generates electricity from a mixture of seawater and river water. Herein, patterned membranes consisting of ultra-thin pore-filling… Continue reading Fouling behavior of wavy-patterned pore-filling membranes in reverse electrodialysis under natural seawater and sewage effluents
Carlos Morillo
March 14, 2022
The synthesis and structural characterization of the novel triruthenium nitrosyl cluster [Ru3(μ-NO)(CO)5(μ-H)(μ-PBut2)2(μ-dppm)] (2) is described. Compound 2 was obtained by… Continue reading Triphenylmethyl Thionitrite: An Efficient NO Transfer Reagent During the Synthesis of a Triruthenium Nitrosyl Cluster
Carlos Morillo
February 24, 2022
Natural extracts have been used in several traditional medicine applications and culinary purposes. Their biological properties (antioxidant and antimicrobial) are… Continue reading Evaluation of plant extracts as an efficient source of additives for active food packaging
Carlos Morillo
February 24, 2022
Carlos Morillo
February 24, 2022
In this article, we synthesized a novel dendritic 2-oxazoline, 2-(3,4,5-tris(4-dodecyloxybenzyloxy)phenyl)-4,5-dihydro-1,3-oxazole), and its amide precursor N-(2-hydroxyethyl)-3,4,5-tris(4-dodecyloxybenzyloxy)benzamide. Of the distinct synthetic routes… Continue reading Synthesis and characterization of dendritic compounds containing nitrogen: monomer precursors in the construction of biomimetic membranes
Carlos Morillo
February 24, 2022
Composite membranes were fabricated with polyethersulfone as a microporous substrate and polyether block amide (PEBA) as a selective layer to… Continue reading Preparation and structures of PEBA gas separation membrane modified by fumed silica for oil vapor separation
Carlos Morillo
February 1, 2022
The relationship between the coordination geometry and photophysical properties of trans-bis[(β-iminomethyl)naphthoxy]platinum(II) was investigated both experimentally and theoretically. A series of… Continue reading Enhancement of Chiroptical Responses of trans-Bis[(β-iminomethyl)naphthoxy]platinum(II) Complexes with Distorted Square Planar Coordination Geometry
Carlos Morillo
February 1, 2022
The process-structure-property correlationships in yttria-magnesia (YM) composite have been investigated. YM composite was synthesized using commercial powders via ball-milling route… Continue reading Scalable and tunable Y2O3-MgO composite for infrared transparency applications
Carlos Morillo
February 1, 2022
ABC-type triblock copolymers are a rising platform especially for oligonucleotide delivery as they offer an additional functionality besides the anyhow… Continue reading Cross-Linkable Polyion Complex Micelles from Polypept(o)ide-Based ABC-Triblock Copolymers for siRNA Delivery
Carlos Morillo
January 18, 2022
C-type asteroids1 are considered to be primitive small Solar System bodies enriched in water and organics, providing clues to the… Continue reading Preliminary analysis of Hayabusa2 samples from C-type asteroid Ryugu
Carlos Morillo
January 31, 2022
Superelasticity is a type of elastic response to an applied external force, caused by a phase transformation. Actuation of materials… Continue reading Superelasticity of a photo-actuating chiral salicylideneamine crystal
Carlos Morillo
January 18, 2022
Carlos Morillo
January 17, 2022
Effect of gallium content on the structural, magnetic, optical and optoelectronic properties of nanocrystalline gallium ferrite GaxFe2-xO3 (x = 0.7,… Continue reading Structural, magnetic, optical, and photoresponse studies of hydrothermally prepared nanocrystalline GaxFe2-xO3 (x=0.7, 1 & 1.3)
Carlos Morillo
January 17, 2022
3D printing of fiber-reinforced composites is expected to be the forefront technology for the next-generation high-strength, high-toughness, and lightweight structural… Continue reading Outstanding Strengthening and Toughening Behavior of 3D-Printed Fiber-Reinforced Composites Designed by Biomimetic Interfacial Heterogeneity
Carlos Morillo
January 5, 2022
Functional microgels provide a versatile basis for synthetic in vitro platforms as alternatives to animal experiments. The tuning of the… Continue reading Rational Design of Thermoresponsive Microgel Templates with Polydopamine Surface Coating for Microtissue Applications
Carlos Morillo
January 5, 2022
Scaffolds capable of inducing ectopic osteogenesis (i.e., osteoinduction) have the potential to treat congenital and massive bone defects. However, the… Continue reading Honeycomb scaffolds capable of ectopic osteogenesis: Histological evaluation of osteoinduction mechanism
Carlos Morillo
January 5, 2022