Promising bifunctional catalyst systems composed of platinum and polyoxometalates (POMs) were applied successfully for the selective catalytic hydrogenation of 2,5-dimethylfuran… Continue reading Selective catalytic hydrogenation of biomass derived furans to secondary alcohols using Pt/polyoxometalate catalysts under mild reaction conditions
Carlos Morillo
January 5, 2022
A simple and efficient protocol allows the oxidation of the cyclopentadiene derivative 5H-dibenzo[e,h]-dibenzo[3,4 : 6,7]cyclohept[1,2-a]azulene (CpCH) provide according ketone CpCO. Comparable to… Continue reading A Novel Cyclopentadienone and its Ruthenium and Iron Tricarbonyl Complexes
Carlos Morillo
January 5, 2022
A new metal-free hydrohalogenation method for alkynes has been developed, which proceeds through a pseudo-intramolecular process. In this reaction, ethynylaniline… Continue reading Metal-Free and syn-Selective Hydrohalogenation of Alkynes through a Pseudo-Intramolecular Process
Carlos Morillo
January 5, 2022
Among additive manufacturing, photocuring 3D printing technologies are very relevant because of its high printing speed and high precision. However,… Continue reading UV assisted photo reactive polyether-polyesteramide resin for future applications in 3D printing
Carlos Morillo
January 5, 2022
Tetragallium(III) complex in [Ga4(L4-Py)2(dpm)6] ⋅ EtOH, with H3L4-Py=2-(hydroxymethyl)-2-(pyridin-4-yl)propane-1,3-diol and Hdpm=dipivaloylmethane, was investigated as a diamagnetic analogue of tetrametallic, propeller-like single-molecule magnets (SMMs).… Continue reading Stereoisomerism in Tetrametallic Propeller-Like Complexes: A Solid-State and Solution NMR Study on a Tetragallium(III) Derivative
Carlos Morillo
January 5, 2022
The development and characterization of a new holographic photopolymer system showing high refractive index modulation (∆n) is presented. It exploits… Continue reading Cyclic allylic sulfide based photopolymer for holographic recording showing high refractive index modulation
Carlos Morillo
January 5, 2022
Geopolymer powders and 3D-printed lattices have shown promising preliminary results as heterogeneous catalysts for the transesterification of vegetable oils to… Continue reading Leachability and basicity of Na- and K-based geopolymer powders and lattices used as biodiesel catalysts
Carlos Morillo
January 5, 2022
Anion-exchange membranes (AEMs) are of growing interest for electrochemical devices such as fuel cells and electrolyzers because the alkaline medium… Continue reading Facile Chemical Modification of Aquivion® Membranes for Anionic Fuel Cells
Carlos Morillo
January 5, 2022
Carlos Morillo
January 5, 2022
The composite films of polydimethylsiloxane (PDMS) and cyanoethylsucrose (CR-U) were prepared and investigated as an electroactive silicone actuator in the… Continue reading Dielectric elastomer actuator behavior of silicone/cyanoethylsucrose composite films: Morphology and space-charge distribution
Carlos Morillo
January 5, 2022
We report on the facile synthesis of SiO2@nitrized-TiO2 nanocomposite (NST) by calcination of TiO2 xerogel with OctaAmmonium POSS® (N-POSS; POSS=polyhedral… Continue reading Synthesis, Characterization and Photocatalytic Behavior of SiO2@nitrized-TiO2 Nanocomposites Obtained by a Straightforward Novel Approach
Carlos Morillo
January 5, 2022
Carlos Morillo
January 5, 2022
Carlos Morillo
January 5, 2022
The authors reveal a thermal actuating bilayer that undergoes reversible deformation in response to low-energy thermal stimuli, for example, a… Continue reading Directional, Low-Energy Driven Thermal Actuating Bilayer Enabled by Coordinated Submolecular Switching
Carlos Morillo
January 5, 2022
Chemical garden (CG) from copper(II) sulfate, nitrate and chloride (CG CuSO4, CG Cu(NO3)2, CG CuCl2) were grown, and characterized from… Continue reading The Copper Chemical Garden as a Low Cost and Efficient Material for Breaking Down Air Pollution by Gaseous Ammonia
Carlos Morillo
January 5, 2022
Peptide-based hydrogels, originated by multiscale self-assembling phenomenon, have been proposed as multivalent tools in different technological areas. Structural studies and… Continue reading The Introduction of a Cysteine Residue Modulates The Mechanical Properties of Aromatic-Based Solid Aggregates and Self-Supporting Hydrogels
Carlos Morillo
January 5, 2022
The following manuscript presents a comprehensive investigation regarding the influence of electrospinning parameters on fiber quality and mechanical properties of… Continue reading Enhancing critical features of poly(amino acid) based meshes
Carlos Morillo
January 5, 2022
The design of efficient aggregation-induced emission materials requires an improved understanding of photophysical processes in aggregated materials. Herein, the photophysical… Continue reading Aggregation-enhanced direct S0–Tn transitions and room-temperature phosphorescence in gold(I)-complex single crystals
Carlos Morillo
January 5, 2022
Carlos Morillo
December 16, 2021
Iron is an essential co-factor for cellular processes. In the immune system, it can activate macrophages and represents a potential… Continue reading Core Cross-Linked Polymeric Micelles for Specific Iron Delivery: Inducing Sterile Inflammation in Macrophages
Carlos Morillo
December 16, 2021