Preparation and Characterization of Some Sol-Gel Modified Silica Coatings Deposited on Polyvinyl Chloride (PVC) Substrates

January 26, 2021

Title

Preparation and Characterization of Some Sol-Gel Modified Silica Coatings Deposited on Polyvinyl Chloride (PVC) Substrates

Author

Valentin Rădițoiu

Year

2021

Journal

MDPI

Abstract

Transparent and antireflective coatings were prepared by deposition of modified silica materials onto polyvinyl chloride (PVC) substrates. These materials were obtained by the sol-gel route in acidic medium, at room temperature (25 °C), using different alkoxysilanes with various functional groups (methyl, vinyl, octyl or hexadecyl). Physicochemical and microstructural properties of resulted silica materials and of thin coatings were investigated through Fourier Transforms Infrared Spectroscopy (FTIR), UV-Vis spectroscopy, Thermal Gravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Atomic Force Microscopy (AFM) and ellipsometric measurements. Wetting behaviors of the silica coatings were evaluated by measurement of static contact angle against water. FTIR spectra of materials confirmed the high degree of cross-linking that result from the formation of the inorganic backbone through the hydrolysis and polycondensation reactions together with the formation of the organic network. These sol-gel silica coatings showed a reduction in the reflectance (10%) compared with uncoated PVC substrate. AFM reveals that the films are uniform, and adherent to the substrate, but their morphology is strongly influenced by the chemical composition of the coating matrices. These silica coatings can be useful for potential electronic and optical devices.

Instrument

FT/IR-6300

Keywords

Optical device