2020 / The Journal of Physical Chemistry B
We investigated the stability of the liquid phase of 1-butyl-3-methylimidazolium iodide (hereafter abbreviated as [C4mim][I]) up to 16.7 GPa at …
Continue reading “Peculiar High-Pressure Phase Behavior of 1-Butyl-3-Methylimidazolium Iodide”
2020 / Applied Physics Express
We fabricated BaSi2 films on Si substrates at 600 °C by sputtering under various radio-frequency powers (PBaSi2). Rutherford backscattering spectrometry …
2020 / Revista Mexicana de Ingeniería Química
Esterification of oleic acid was carried out to obtain methyl esters at temperatures below the critical point of methanol in …
2020 / Microchemical Journal
Reliability of a method for cancer detection is a key issue. It is because of fear for false positive and …
2020 / Carbon
Recently, the scientific interest in developing rechargeable aluminium-ion (Al-ion) batteries has increased, triggered by its theoretical capacity, low cost and …
Continue reading “Widely commercial carbonaceous materials as cathode for Al-ion batteries”
2020 / Applied Physics Express
We fabricated randomly oriented polycrystalline BaSi2 films on TiN metal layers by sputtering for the deployment of BaSi2 solar cells …
2020 / Journal of Alloys and Compounds
Characterization of nuclear materials under controlled conditions promotes a better understanding of their chemistry and provides insight into their stability. …
2020 / Journal of the Water Environment Federation
The mechanisms of plastic transport in rivers remain an important knowledge gap in global plastic pollution research and management. We …
2020 / FlatChem
Facile and versatile strategies for the preparation of reduced graphene oxide hydrogel (rGH) are of great interest due to its …
2020 / Chemical Engineering Journal
Recently, lithium–sulfur (Li–S) batteries have been demonstrated as promising next-generation energy-storage devices. However, their practical application is hindered by poor …
2020 / Surface and Coatings Technology
This manuscript presents the nature of interaction of energetic plasmoids, generated in the Gas Injection Magnetron Sputtering (GIMS) technique, with …
2020 / Carbon
In this study, we prepared Q-carbon by adjusting the sp3 content in diamond-like carbon (DLC) films and the laser energy …
2017 / International Journal of Hydrogen Energy
In order to enhance hydrogen storage capacity of carbonaceous materials through metal modification, FeNiCr-carbon composites were prepared by calcination of …
2020 / Chemical Engineering Journal
The application of stretchable strain sensors in civil and structural engineering involving infrastructural monitoring has become the hot subject of …
2019 / Applied Energy
This work investigated the influence of biomass hydrothermal treatment (HT) on co-gasification reactivity and synergy of anthracite coal and banana …
2018 / Chemical Engineering Science
Carbon nanotube (CNT) was synthesized during combustion in a diesel engine by adding catalyst sources into fuel. Fuel used in …
2020 / 2D Materials
Molybdenum disulfide (MoS2) MOSFETs have been widely reported to exhibit hysteresis behavior, which is usually attributed to charge trapping effects …
2019 / Marine Pollution Bulletin
Marine litter is widely dispersed throughout coastal environments. Assessing the distribution and accumulation
2020 / Microbial Pathogenesis
Despite the main strategy to overcome bacterial resistance has focused on the development of more potent antimicrobial agents, the evolutionary …
2020 / RSC Advances
Two-dimensional molybdenum disulfide (MoS2) is emerging as a catalyst for energy and environmental applications. Recent studies have suggested the stability …
