Leah Pandiscia, PhD
September 22, 2019
Insoluble hierarchical polybithiophene/poly(ethylenedioxythiophene) thin films with a double-layered structure were prepared on an indium tin oxide transparent electrode by sequential… Continue reading Fabrication and Photocurrent Generation Properties of Insoluble Hierarchical Polythiophene Thin Films Prepared by Sequential Electrochemical Polymerization
Leah Pandiscia, PhD
September 22, 2019
One of the promising material for proton-conducting solid electrolyte operating at intermediate temperature range (400-600 °C) is the Yttrium-doped BaZrO3… Continue reading Preparation of Y-doped BaZrO3 Proton Conducting Solid Electrolyte via Modified Low Temperature Pechini Method.
Leah Pandiscia, PhD
September 22, 2019
Leah Pandiscia, PhD
September 22, 2019
We present the use of Selenium (Se) and Tellurium (Te) as promoters in the growth of carbon nanotubes (CNTs) by… Continue reading Group 16 elements control the synthesis of continuous fibers of carbon nanotubes
Leah Pandiscia, PhD
September 22, 2019
Nitrogen-doped graphene potentially could be used in electronic devices, sensors, and energy-based devices. The bonding state between the carbon and… Continue reading Selective nitrogen doping of graphene by energy-controlled neutral beam
Leah Pandiscia, PhD
September 22, 2019
[5,15-Di(4-aminophenyl)-10,20-diphenylporphyrinato]zinc(II) was found to electropolymerize on electrodes such as glassy carbon (GC), indium tin oxide (ITO), and tin oxide, to… Continue reading Electrochemical fabrication of one-dimensional porphyrinic wires on electrodes
Leah Pandiscia, PhD
September 22, 2019
A series of bulk-heterojunction organic solar cells incorporating silver nanoparticles was fabricated and evaluated. Silver nanoparticles were incorporated in the… Continue reading Incorporation Effect of Silver Nanoparticles on Inverted Type Bulk-Heterojunction Organic Solar Cells
Leah Pandiscia, PhD
September 22, 2019
To study the Li storage mechanism in multiwalled carbon nanotubes (MWCNTs), MWCNTs were coated with pyrolytic carbon, prepared by dipping… Continue reading Understanding the Li Storage Sites in MWCNTs: SEI, the Key for Delithiation at High Potential
Leah Pandiscia, PhD
September 22, 2019
V2O5 thin films were deposited onto fused silica, alumina and conductometric sensor supports by means of rf reactive sputtering from a… Continue reading V2O5 thin films for gas sensor applications
Leah Pandiscia, PhD
September 22, 2019
An equimolar mixture of lithium bis(trifluoromethanesulfonyl)amide (Li[TFSA]) and either triglyme (G3) or tetraglyme (G4) yielded stable molten complexes: [Li(G3)][TFSA] and… Continue reading Li+ Solvation and Ionic Transport in Lithium Solvate Ionic Liquids Diluted by Molecular Solvents
Leah Pandiscia, PhD
September 22, 2019
Carlos Morillo
September 17, 2019
Leah Pandiscia, PhD
July 30, 2019
The thermal conductivities of ultrahigh tensile strength polyacrylonitrile (PAN)-based (T1000GB) and ultrahigh modulus pitch-based (K13D) carbon fibers with carbon nanotubes… Continue reading Untitled
Leah Pandiscia, PhD
July 30, 2019
The dissolution of most common multicomponent silicate minerals and glasses is typically incongruent, as shown by the nonstoichiometric release of… Continue reading Mechanism of leached layer formation during chemical weathering of silicate minerals
Leah Pandiscia, PhD
July 30, 2019
Vertically aligned carbon nanotubes have been synthesized from botanical hydrocarbons: Turpentine oil and Eucalyptus oil on Si(100) substrate using Fe… Continue reading Vertically aligned carbon nanotubes from natural precursors by spray pyrolysis method and their field electron emission properties
Leah Pandiscia, PhD
July 30, 2019
Ex situ Raman spectroscopy and Raman mapping showed that at temperatures below 1300 °C, magnesia reacted with either alumina or… Continue reading Ex situ Raman mapping study of mechanism of cordierite formation from stoichiometric oxide precursors
Leah Pandiscia, PhD
July 30, 2019
Reactivity between SiC and Ir as a function of SiC-crystallinity was investigated by diffusion bonding technique under a vacuum and… Continue reading Solid state reactions between SiC and Ir
Leah Pandiscia, PhD
July 30, 2019
Hypercoal (HPC) is examined as a caking additive to the mixture of strongly coking coal and non-slightly coking coal. Samples… Continue reading Evaluation of the Structure and Strength of Coke with HPC Binder under Various Preparation Conditions
Leah Pandiscia, PhD
July 30, 2019
To achieve the three dimensional additive manufacturing process, we investigated X-ray radiolysis-induced chemical reaction of Cu(CH 3 COO) 2 solution.… Continue reading X-ray radiolysis-based three dimensional additive manufacturing process
Leah Pandiscia, PhD
July 30, 2019