2018 / Journal of Biological Chemistry
Diagnosis and treatment of Fibromyalgia (FM) remains a challenge owing to the lack of reliable biomarkers. Our objective was to… Continue reading Metabolic fingerprinting for diagnosis of fibromyalgia and other rheumatologic disorders
2019 / Journal of Applied Physics 126, 205106 (2019); https://doi.org/10.1063/1.5129226
The crystallinity and wafer uniformity of (2¯01) and (010) oriented β-Ga2O3 substrates grown by edge-defined film-fed growth (EFG) were investigated… Continue reading X-ray diffraction and Raman characterization of β-Ga2O3 single crystal grown by edge-defined film-fed growth method
2020 / Nature Research
Diatomic carbon (C2) exists in carbon vapour, comets, the stellar atmosphere, and interstellar matter, but although it was discovered in… Continue reading Room-temperature Chemical Synthesis of C2: Evidence for Quadruple Bonding Character and Role in Nanocarbon Formation
2009 / October 2009 Journal of Non-Crystalline Solids 355(37):2020-2022
The paper studies the materials from ZnO–TiO2–B2O3 ternary system, obtained by sol–gel method [1,2], starting from organic and inorganic precursors.… Continue reading Raman and ESR study of sol–gel materials from ZnO–TiO 2–B 2O 3 system
2020 / The Journal of Physical Chemistry B
We investigated the stability of the liquid phase of 1-butyl-3-methylimidazolium iodide (hereafter abbreviated as [C4mim][I]) up to 16.7 GPa at… Continue reading Peculiar High-Pressure Phase Behavior of 1-Butyl-3-Methylimidazolium Iodide
2020 / Applied Physics Express
We fabricated BaSi2 films on Si substrates at 600 °C by sputtering under various radio-frequency powers (PBaSi2). Rutherford backscattering spectrometry… Continue reading Impact of radio-frequency power on the photoresponsivity enhancement of BaSi2 films formed by sputtering
2020 / Revista Mexicana de Ingeniería Química
Esterification of oleic acid was carried out to obtain methyl esters at temperatures below the critical point of methanol in… Continue reading Sulfonated rim rubber used as a solid catalyst for the biodiesel production with oleic acid and optimized by Box-Behnken method
2020 / Microchemical Journal
Reliability of a method for cancer detection is a key issue. It is because of fear for false positive and… Continue reading Reliable and sensitive detection of pancreatic cancer marker by gold nanoflower-based SERS mapping immunoassay
2020 / Applied Physics Express
We fabricated randomly oriented polycrystalline BaSi2 films on TiN metal layers by sputtering for the deployment of BaSi2 solar cells… Continue reading Fabrication of high-photoresponsivity BaSi2 films formed on conductive layers by radio-frequency sputtering
2020 / Journal of Alloys and Compounds
Characterization of nuclear materials under controlled conditions promotes a better understanding of their chemistry and provides insight into their stability.… Continue reading Microscopy and spectroscopy of plutonium dioxide aging under ambient and near-ambient conditions
2020 / Journal of the Water Environment Federation
The mechanisms of plastic transport in rivers remain an important knowledge gap in global plastic pollution research and management. We… Continue reading Effects of hydrodynamics on the cross‐sectional distribution and transport of plastic in an urban coastal rive
2020 / FlatChem
Facile and versatile strategies for the preparation of reduced graphene oxide hydrogel (rGH) are of great interest due to its… Continue reading Synthesis of silver nanoparticles /porphyrin/reduced graphene oxide hydrogel as dye adsorbent for wastewater treatment
2020 / Chemical Engineering Journal
Recently, lithium–sulfur (Li–S) batteries have been demonstrated as promising next-generation energy-storage devices. However, their practical application is hindered by poor… Continue reading A multifunctional SnO2-nanowires/carbon composite interlayer for high-performance lithium-sulfur batteries
2020 / Surface and Coatings Technology
This manuscript presents the nature of interaction of energetic plasmoids, generated in the Gas Injection Magnetron Sputtering (GIMS) technique, with… Continue reading The state of coating–substrate interfacial region formed during TiO2 coating deposition by Gas Injection Magnetron Sputtering technique
2020 / Carbon
In this study, we prepared Q-carbon by adjusting the sp3 content in diamond-like carbon (DLC) films and the laser energy… Continue reading Formation of Q-carbon by adjusting sp3 content in diamond-like carbon films and laser energy density of pulsed laser annealing
2020 / Carbon
Recently, the scientific interest in developing rechargeable aluminium-ion (Al-ion) batteries has increased, triggered by its theoretical capacity, low cost and… Continue reading Widely commercial carbonaceous materials as cathode for Al-ion batteries
2020 / 2D Materials
Molybdenum disulfide (MoS2) MOSFETs have been widely reported to exhibit hysteresis behavior, which is usually attributed to charge trapping effects… Continue reading Investigating the transient response of Schottky barrier back-gated MoS2 transistors
2019 / Marine Pollution Bulletin
Marine litter is widely dispersed throughout coastal environments. Assessing the distribution and accumulation
2020 / Microbial Pathogenesis
Despite the main strategy to overcome bacterial resistance has focused on the development of more potent antimicrobial agents, the evolutionary… Continue reading Structure-activity relationships and mechanism of action of Tetragomycin derivatives as inhibitors of Staphylococcus aureus staphyloxanthin biosynthesis
2020 / RSC Advances
Two-dimensional molybdenum disulfide (MoS2) is emerging as a catalyst for energy and environmental applications. Recent studies have suggested the stability… Continue reading Stability of 2H- and 1T-MoS2 in the presence of aqueous oxidants and its protection by a carbon shell
