Raman Analysis of Injection Molding -measurement of the polymer state during a process

By Heather Haffner

PDF IconDownload This Application

August 22, 2022

Introduction

Raman Analysis of Injection molding using a Probe Raman spectrometer

Raman analysis of injection molding using a probe raman spectrometer
RMP-210 Raman Spectrometer

In this brief application Raman analysis of injection molding was made using the RMP-210 a ‘field-rugged’ Raman Spectrometer consisting of a probe head and monochromator, which are connected by optical fibers. Since the system does not require external cooling, it is portable and allows measurements in almost any location. The probe head is extremely flexible, making remote measurements convenient as the analysis probe can be brought directly to the sample. A CCD camera located in the probe head enables the user to view the targeted sample image.

Optical fiber

Polycrystalline Si spectrum on a glass substrate

Monitoring of an injection molding process

Polymer state analysis during an injection molding process

This document has been prepared based on information available at the time of publication and is subject to revision without notice. Although the contents are checked with the utmost care, we do not guarantee their accuracy or completeness. JASCO Corporation assumes no responsibility or liability for any loss or damage incurred as a result of the use of any information contained in this document. Copyright and other intellectual property rights in this document remain the property of JASCO Corporation. Please do not attempt to copy, modify, redistribute, or sell etc. in whole or in part without prior written permission.

Featured Products:

About the Author