Although laser irradiation with femtosecond pulses is known to generate crystallization and morphological changes, the contribution of optical parameters to… Continue reading Independent contribution of optical attenuation length in ultrafast laser-induced structural change
Carlos Morillo
January 17, 2022
Activated carbon xerogel monoliths were prepared from resorcinol and formaldehyde via a catalyst-free and template-free hydrothermal polycondensation reaction, followed by… Continue reading Electrochemical properties of an activated carbon xerogel monolith from resorcinol–formaldehyde for supercapacitor electrode applications†
Carlos Morillo
January 17, 2022
Safe, stable, and earth-abundant materials for solar cell applications are of particular importance to realize a decarbonized society. Semiconducting barium… Continue reading Recent Progress Toward Realization of High-Efficiency BaSi2 Solar Cells: Thin-Film Deposition Techniques and Passivation of Defects
Carlos Morillo
January 17, 2022
The effects of radiation on a series of UiO derivative metal–organic frameworks (MOFs) that contain the same zirconium hexamer node… Continue reading Linker Contribution toward Stability of Metal–Organic Frameworks under Ionizing Radiation
Carlos Morillo
January 17, 2022
Carlos Morillo
January 17, 2022
Several biochars and activated carbons are prepared from cellulose fraction of some agricultural wastes (linen, cotton and wheat). The obtained… Continue reading Valorization of agricultural waste as a carbon materials for selective separation and storage of CO2, H2 and N2
Carlos Morillo
January 17, 2022
Thermo/redox-sensitive injectable hydrogels made from diselenide linked methoxy poly (ethylene glycol)-block-poly (ε-caprolactone-co-p-dioxanone) (Bi(PPCD)-Se2) were reported in this study. Bi(PPCD)-Se2 hydrogels’… Continue reading Development of thermo/redox-responsive diselenide linked methoxy poly (ethylene glycol)-block-poly(ε-caprolactone-co-p-dioxanone) hydrogel for localized control drug release
Carlos Morillo
January 17, 2022
Carlos Morillo
January 17, 2022
Natural product-derived carbon dots (CDs) have been widely studied as environmentally friendly materials for various applications, such as for bioimaging… Continue reading Blue–Green Electroluminescent Carbon Dots Derived from Fenugreek Seeds for Display and Lighting Applications
Carlos Morillo
January 17, 2022
Molecular engineering via functionalization has been a great tool to tune noncovalent intermolecular interactions. Herein, we demonstrate three-dimensional highly crystalline… Continue reading Enabling three-dimensional porous architectures via carbonyl functionalization and molecular-specific organic-SERS platforms
Carlos Morillo
January 17, 2022
Alkali-activated materials (AAMs) and “geopolymers” are inorganic polymeric materials obtained by mixing of solid aluminosilicate precursors with an alkaline solution… Continue reading Raman spectroscopy potentiality in the study of geopolymers reaction degree
Carlos Morillo
January 5, 2022
We present a new class of hybrid 2D electrodes, where mercury is incorporated between two graphene monolayers, prepared by bottom-up… Continue reading Graphene-Mercury-Graphene Sandwich Electrode for Electroanalysis
Carlos Morillo
January 5, 2022
We report a detailed investigation by Raman spectroscopy of the holey nanographene C216, a hexagon-shaped disk with armchair edges (1.4 nm… Continue reading Raman spectroscopy of holey nanographene C216
Carlos Morillo
January 5, 2022
Zeolites are present in numerous outcrops of volcanites of different ages in Sicily (Italy). Some of these outcrops are important… Continue reading In situ and micro-Raman spectroscopy for the identification of natural Sicilian zeolites
Carlos Morillo
December 16, 2021
Field data on plastic pollution is extremely limited in Southeast Asian rivers. Here we present the first field measurements of… Continue reading Plastic transport in a complex confluence of the Mekong River in Cambodia
Heather Haffner
December 6, 2021
Microplastics (MPs) are recently considered anthropogenic pollutants. However, studies on MPs have been primarily conducted in the marine environment. Many… Continue reading A Study on the Proper Sampling Method for Microplastic Distributions in the Surface Freshwater: From Case Studies in Japan and Indonesia
Heather Haffner
December 6, 2021
The thermodynamic properties of few-layer graphene arbitrarily stacked on LiNbO3 crystal were characterized by measuring the parameters of a surface… Continue reading Possible pair-graphene structures govern the thermodynamic properties of arbitrarily stacked few-layer graphene
Carlos Morillo
December 6, 2021
The diffusion of light by random materials is a general phenomenon that appears in many different systems, spanning from colloidal… Continue reading Disordered photonics behavior from terahertz to ultraviolet of a three-dimensional graphene network
Carlos Morillo
December 6, 2021
Molecular engineering via functionalization has been a great tool to tune noncovalent intermolecular interactions. Herein, we demonstrate three-dimensional highly crystalline… Continue reading Enabling three-dimensional porous architectures via carbonyl functionalization and molecular-specific organic-SERS platforms
Carlos Morillo
October 25, 2021
Waterborne poly(urethane urea)s (PUDs) containing graphene derivatives with different morphologies and surface polarities were synthesized via in situ polymerization by… Continue reading Structure and adhesion properties of waterborne poly(urethane urea)s containing small amounts of different graphene derivatives
Carlos Morillo
September 27, 2021